The Importance of Electrical Systems in Buildings

Electrical systems planning is the process of developing a plan for the electrical installation and distribution in a building. The goal of this process is to ensure that your electrical system will be able to provide power to all of its components. And while also ensuring that it fits within the budget set by your client or owner. This article will discuss some of the steps involved in this process and what they mean for you as an electrician 

Power Distribution in Electrical Systems

Power distribution is the part of your electrical system that distributes power to outlets and switches. It’s important for several reasons, including safety and convenience. 

Safety: Power distribution can prevent fires from starting in areas where there are no electrical outlets or switches. If you don’t plan out your power distribution properly. It could be difficult to keep everyone’s devices powered up at all times as they work on their projects throughout a building’s interior spaces. For example, if someone needs an outlet near their workspace but doesn’t have one nearby (or doesn’t know how). They may just plug something else into the wall instead—which could cause an unintended fire hazard! 

Convenience: Sometimes you may want access to multiple types of devices at once. For example, if there are two different kinds of lighting systems being used within one room; or perhaps there are two different kinds of computers being used by different individuals within another area (like a classroom). In these cases, having good planning skills will help ensure that all sorts of equipment get plugged into each outlet without causing problems later down. The line when it comes time for maintenance duties like cleaning up after parties held during school breaks.

Lighting System in Electrical Systems

Light is a basic need for humans. It’s important for safety and security, productivity, morale and more. Lighting can be used to make a space look better or feel better. 

The importance of lighting system planning cannot be understated: it has been shown that good lighting systems can reduce crime rates by up to 30% over time (1). 

CCTV, Intrusion system, Fire Alarm 

CCTV, Intrusion system and Fire Alarm systems are very important in any building. The use of these systems will help you to protect your business from any type of threat or theft. The planning part is very important because it helps you to make sure that everything works properly and efficiently without any problems. 

Planning can be done by using a software program like Building Management System (BMS). This BMS gives you a tool where you can plan all the electrical needs inside your office building so that there won’t be any issues later on when they are installed! 

Risers of Electrical Systems

A riser is a type of electrical system that allows you to add equipment above the roof. It’s especially useful for tall buildings, where you may need to install extra equipment at the top of your building. Risers can be installed in two ways: “flat” or “angled.” 

• Flat risers are installed vertically and perpendicular to the roofline. They’re used when installing electrical systems within existing structures. (Such as office buildings) or retrofitting older buildings without structural changes needed for new construction work. 
• Angled risers are installed at an angle relative to the different sides of your building. This gives you flexibility when installing various types of electrical systems throughout your structure. Helps reduce costs because it reduces construction time and labor costs. A flat-rised area will have one electrical panel per floor level while an angled section will have multiple panels spread across each floor level. If there isn’t enough room within existing walls but still needs power outlets on every floor level. Then consider adding another layer over existing levels by installing indirect current boxes instead. These are sometimes referred to as ‘building spurs’. 

Electrical Panel boards 

Electrical panel boards are the heart of your electrical system. They contain all of the equipment that controls electricity, including switches, receptacles, and other devices. Panel boards are typically located in a basement or room below ground level. 

The number of electrical panels you need depends on how many circuits you want to run through your building. As well as what type of equipment they will control such as lights or fans. You should plan for at least one circuit per each large room in your home so that everything works properly when needed (such as during a commercial kitchen remodel). 

It is wise to plan out the panel layout before the project starts. 

It is wise to plan out the panel layout before the project starts. This can be done by drawing up a panel layout and using it as a guide in laying out electrical panels, while also consulting with your electrical contractor. 

A good panel layout has many benefits including: 

• The ease of installation. A properly planned and executed panel layout will result in less time spent on wiring and more time spent on other aspects of construction or renovation projects. 

Conclusion 

We have said it before, electrical systems planning is an important part of the building process. So not only does it help you understand where all your power and lighting needs are going to come from, but it also provides you with a template that can be used as a foundation for other aspects of the project. Therefore, if you want to know more about how electrical systems planning helps your building go off without a hitch, contact us today! www.themetaplans.com

Contact us  

If you have any questions about the content of this guide, or for help with your project in general, please contact us by email.  We will be happy to assist. 

Website: www.themetaplans.com

Email: [email protected]

Phone: +961 71 60 53 61